Com-power AD-100 Bedienungsanleitung PDF herunterladen

Description

The Tuned Dipole set model AD-100 is a standard

antenna set which operates in the frequency range of

30 MHz to 1000 MHz for E-Field measurements. This

set consists of four baluns and was designed accord-

ing to American National Standard for Calibration of

Antennas for Radiated Emissions in Electromagnetic

Interference (EMI) Control C63.5.

The dipoles can be tuned to any frequency by select-

ing the balun for that frequency and adjusting the

length of antenna elements to the half wavelength

(calculated by 3x10

/frequency in MHz/2). The length

can be achieved by attaching together pairs of xed

and adjustable elements (lower frequencies) or a pair

of adjustable elements (higher frequencies) to each

side of the antenna balun. The xed length elements

were designed to minimize drooping, especially at low

frequencies where the tuned dipole elements are long.

The dipoles are shipped with typical calibration data,

which is included in the manual. However, the dipole

set can be individually calibrated upon request. The

antenna set includes a custom carrying case.

Application

Although broadband antennas such as biconical and

log periodic antennas are used for day-to-day EMC

measurement, tuned dipoles antennas are still con-

sidered the standard antenna. Dipole antennas are not

considered the antennas of choice for sweep measure-

ments, because it must be tuned at each frequency.

However, dipoles are preferable and in some cases

required for site attenuation measurements. It is also

considered the reference antenna that can be used to

calibrate other antennas operating in the same fre-

quency range.

Standard Conguration:

• Four antenna baluns

• Four xed length extension rods

• Two low frequency adjustable elements

• Two medium frequency adjustable elements

• Balun 1 base drilled to accept 1/4" x 20 threads

• Typical calibration data in the manual

Optional items:

• Clamp block ( ATC-001) for tripod mounting.

• Individual calibration data & certicate.

Features

Frequency range - 30 MHz - 1000 MHz

Low balun loss

Appropriate for EMI site calibration

Carrying case

Two year warranty

AD-100

Tuned Dipole Antenna Set

Com-Power Corporation (714) 528 - 8800 www. com-power.com sales@com-power.com

1 2

Inhaltsverzeichnis

Seite 1 - Tuned Dipole Antenna Set

DescriptionThe Tuned Dipole set model AD-100 is a standard antenna set which operates in the frequency range of 30 MHz to 1000 MHz

Seite 2 - Specications

SpecicationsAll values are typical, unless specied.Specications are subject to change without notice.Antenna Type: Half wave tuned dipoleFreq

Kommentare zu diesen Handbüchern

Keine Kommentare

Com-power AD-100 Bedienungsanleitung

Stöbern Sie online oder laden Sie Bedienungsanleitung nach Kommunikationszubehör Com-power AD-100 herunter. Com-Power AD-100 User Manual Benutzerhandbuch

Inhaltsverzeichnis

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für Kommunikationszubehör Com-power AD-100